Brocade Fabric Watch Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000438-01, June 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks Multiprotocol Base 8-port Router

Fabric Watch Administrator’s Guide 39

53-0000438-01

Configuring Fabric Watch thresholds

Above 0 19

InBetween 0 0

FIGURE 18 Change above alarm

Figure 19 shows how to select the custom settings for the threshold alarm level for the

RXPerformance area. The options are either to accept the default settings or provide custom

settings.

1 : change behavior type 11 : change threshold alarm level

2 : change behavior interval 12 : change changed alarm

3 : change threshold boundary level 13 : change belowalarm

4 : change custom unit 14 : change abovealarm

5 : change custom timebase 15 : change inBetween alarm

6 : change custom low 16 : apply threshold alarm changes

7 : change custom high 17 : cancel threshold alarm changes

8 : change custom buffer 18 : return to previous page

9 : apply threshold boundary changes

10 : cancel threshold boundary changes

Select choice => : (1..18) [18]11

1 : Default

2 : custom

Enter alarm level type => : (1..2) [1] 2

Index ThresholdName BehaviorType BehaviorInt

216 eportRXPerf216 Triggered 1

217 eportRXPerf217 Triggered 1

218 eportRXPerf218 Triggered 1

219 eportRXPerf219 Triggered 1

220 eportRXPerf220 Triggered 1

221 eportRXPerf221 Triggered 1

222 eportRXPerf222 Triggered 1

223 eportRXPerf223 Triggered 1

Threshold boundary level is setat : Custom

DefaultCustom

Unit Percentage(%) Percentage(%)

Time base minuteminute

Low 0 0

High 100 80

BufSize 0 0

Threshold alarmlevel is set at: Custom

FIGURE 19 Changing the threshold alarm level

Figure 20 shows how to apply the custom value for the threshold alarm changes; unless you apply

the value, it does not take effect.