Brocade Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0 (53-1000602-01, October 2007)

xvi Fabric OS MIB Reference
53-1000602-01
• Best practice guides, including the SAN Security Best Practice Guide, white papers, online
demos, data sheets, and other documentation is available through the Brocade Partner Web
site.
• The CERT
®
Coordination Center of Carnegie Mellon University provides industry-level
information about certification at:
http://www.cert.org
For additional resource information, visit the Technical Committee T11 Web site. This Web site
provides interface standards for high-performance and mass storage applications for Fibre
Channel, storage management, and other applications:
http://www.t11.org
For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web
site:
http://www.fibrechannel.org
Getting Technical Help
Contact your switch supplier for hardware, firmware, and software support, including product
repairs and part ordering. To expedite your call, have the following information immediately
available:
1. General Information
- Technical Support contract number, if applicable
- Switch model
- Switch operating system version
- Error numbers and messages received
- supportSave command output
- Detailed description of the problem, including the switch or fabric behavior immediately
following the problem, and specific questions
- Description of any troubleshooting steps already performed and the results
- Serial console and Telnet session logs
- Syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label,
as shown here:
:
The serial number label is located as follows:
- Brocade 200E—On the nonport side of the chassis
*FT00X0054E9*
FT00X0054E9