Brocade Fabric OS MIB Reference - Supporting Fabric OS 5.3.0 (53-1000439-01, June 2007)

Fabric OS MIB Reference 221

53-1000439-01

connUnitPortStatus 1.3.6.1.3.94.1.10.1.7

An overall protocol status for the port. For a U_Port, the status should be ols (9).

Values Possible values are:

• unknown (1)

• unused (2) Device cannot report this status.

• ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed.

• warning (4) Do not use.

• failure (5) Port is faulty.

• notparticipating (6) Loop not participating and does not have a loop address. Do not use.

• initializing (7) Protocol is proceeding. Do not use.

• bypass (8) Do not use.

• ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.)

NOTE

In FOS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2

(unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty.

In FOS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the value

is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown portype

and offline port state, the value is 1 (unknown).

connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8

The technology of the port transceiver.

Values Possible values are:

• unknown (1)

• other (2)

• unused (3)

• shortwave (4)

• longwave (5)

• copper (6)

• scsi (7)

• longwaveNoOFC (8)

• shortwaveNoOFC (9)

• longwaveLED (10)

• ssa (11) (Not supported in Fabric OS v2.6.1.)

For an external FC_Port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6

(copper).