Brocade Fabric OS MIB Reference - Supporting Fabric OS 5.3.0 (53-1000439-01, June 2007)

146 Fabric OS MIB Reference

53-1000439-01

swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3

This is the Fibre Channel domain on the other end of the ISL.

This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW.

swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4

This is the port index on the other end of the ISL.

The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000,

24000, and 48000 directors are 1 through the maximum number of ports +1.

swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5

The baud rate of the ISL.

Values Possible values are:

• other (1) None of the following.

• oneEighth (2) 155 Mbaud.

• quarter (4) 266 Mbaud.

• half (8) 532 Mbaud.

• full (16) 1 Gbaud.

• double (32) 2 Gbaud.

• quadruple (64) 4 Gbaud.

The valid values depend on the capabilities of the switch or blade.

swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6

The current state of the ISL. The possible values are as follwos.

0 - ISL is down.

1 - ISL is initiating and not yet operational.

2, 3, 4, - used for notification of internal states.

5 - ISL is active.

swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7

The current link cost of the ISL. In other words, the cost of a link to control the routing algorithm.

swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8

The WWN of the remote port.