Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602-01, April 2008)

Fabric OS MIB Reference 245
53-1000602-01
trapRegFilter 1.3.6.1.3.94.2.3.1.3
8
trapRegFilter 1.3.6.1.3.94.2.3.1.3
This value defines the trap severity filter for this trap host. The connUnit sends traps to this host
that have a severity level less than or equal to this value. The default value of this object is Warning.
The mapping between errorlog severity level and this variable is:
This severity applies to all entries. See
FcEventSeverity in Table 20 on page 205.
The values 1, 3, 7, and 10 are not valid for SET operations.
trapRegRowState 1.3.6.1.3.94.2.3.1.4
Specifies the state of the row. This entry always returns rowActive and allows for read-only.
TABLE 22
System Error Log
errshow command
FA-MIB
none (0) unknown (1)
Critical (1) critical (4)
Error (2) error (5)
Warning (3) warning (6)
Info (4) info (8)
Debug (5) debug (9)
TABLE 23 TrapRegRowState for Read/Write
State Description (Read) Description (Write)
rowDestroy (1) Read: Can never happen. Write: Remove this row from the table.
rowInactive (2) Read: Indicates that this row does
exist but that traps are not enabled
to be sent to the target.
Write: If the row does not exist and the agent allows
writes to the trap table, then a new row is created. The
values of the optional columns are set to default
values. Traps are not enabled to be sent to the target.
If the row already existed, then traps are disabled from
being sent to the target.
rowActive (3) Read: Indicates that this row exists
and that traps are enabled to be sent
to the target.
Write: If the row does not exist and the agent allows
writes to the trap table, then a new row is created. The
values of the optional columns are set to default
values. Traps are enabled to be sent to the target. If
the row already exists, then traps are enabled to be
sent to the target.