Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602-01, April 2008)

Fabric OS MIB Reference 225

53-1000602-01

connUnitPortName 1.3.6.1.3.94.1.10.1.17

• Return values are:

- resetConnUnitPort portDisable (F or E_Port, loop for U_Port)

- bypassConnUnitPort portDisable (FL_Port)

- unbypassConnUnitPort portEnable (FL_Port)

- offlineConnUnitPort portDisable (E, F, FL_Port)

- onlineConnUnitPort portEnable (U)

- resetConnUnitPortCounters clear the port statistics counter. When rebooted, this

defaults to 1 (unknown).

connUnitPortName 1.3.6.1.3.94.1.10.1.17

A string describing the addressed port.

This object is read-only for Brocade switches.

connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18

This is the internal port number by which this port is known. In many implementations, this should

be the same as connUnitPortIndex. Some implementations might have an internal port

representation not compatible with the rules for table indices. In these cases, provide the internal

representation of this port in this object. This value might also be used in the

connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable.

The internal port numbers for Brocade switch. The Brocade switches support 0 through maximum

number of ports.

The maximum number of supported ports are as follows:

Brocade 3200, 3250 8 ports

Brocade 4012 12 ports

Brocade 200E, 3800, 3850 16 ports

Brocade 3900, 4100 32 ports

Brocade 4900 64 ports

Brocade 5000 32 ports

Brocade 7500 16 ports

Brocade 7600 16 ports

Brocade 12000 128 ports

Brocade 24000 128 ports

Brocade 48000 256 ports

Brocade DCX 384 ports

connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19

This OID is depricated.