Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602-01, April 2008)

Fabric OS MIB Reference 221
53-1000602-01
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
8
For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing,
faulted).
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
An overall protocol status for the port. For a U_Port, the status should be ols (9).
Values Possible values are:
• unknown (1)
• unused (2) Device cannot report this status.
• ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed.
• warning (4) Do not use.
• failure (5) Port is faulty.
• notparticipating (6) Loop not participating and does not have a loop address. Do not use.
• initializing (7) Protocol is proceeding. Do not use.
• bypass (8) Do not use.
• ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.)
NOTE
In FOS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2
(unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty.
In FOS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the value
is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown portype
and offline port state, the value is 1 (unknown).
connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8
The technology of the port transceiver.
Values Possible values are:
• unknown (1)
• other (2)
• unused (3)
• shortwave (4)
• longwave (5)
• copper (6)
• scsi (7)
• longwaveNoOFC (8)
• shortwaveNoOFC (9)
• longwaveLED (10)
• ssa (11) (Not supported in Fabric OS v2.6.1.)