HP StorageWorks MSL2024 Tape Library getting started guide (AH559-96001, March 2007)

Plug one end of the Ethernet cable into the Ethernet port
on the back of the Library. Plug the other end of the
cable into an Ethernet LAN port.
Plug the power cable into the Library and the power
outlet.
Power on the Library using the power button located at
the front of the Library. Check the LCD screen to make
sure the Library is receiving power.
Power on the host server and all devices you powered
off earlier.
Powering on the Library
11
Setting the administrator
password
12
Setting an administrator password provides access to the
administrator functions with the remote management
interface (RMI) and restricts access to administrator
functions from people who do not know the administrator
password. The administrator password must be exactly
eight digits consisting of the numbers 0 through 9.
To set the administrator password:
1. On the front panel, press Enter.
2. Press Next until the display shows Configuration.
Press Enter.
3. Press Enter to change the administrator password.
4. The first number will flash. Press Next until the first
number for the new password is displayed. Press
Enter to accept the number. The next number flashes.
Repeat for each number in the password.
5. Press Cancel twice to move to the top of the menu.
Setting the date and time
13
This option sets the date and time used by the Library to
record events and should be set during the initial
installation process.
Access to this feature requires the administrator
password, if set.
To set the date and time:
1. On the front panel, press Enter.
2. Press Next until the display shows Library
Date/Time. Press Enter.
3. Enter the administrator password, if requested.
4. A number in the year will flash. Click Next until the
correct number is displayed. Click Enter to accept
the number. Repeat for each number in the date and
time.
5. Press Cancel until the display shows the home
screen.
NOTE: When setting the hours, the time is based
on a 24-hour clock. There is no AM or PM
designation. For example, 1:00 PM is 13:00.