HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

152
show ntp-status
Description Shows the status of the use of Network Time Protocol (NTP) in the system.
Syntax
show ntp-status
Output Status
• activated: NTP is enabled
• deactivated: NTP is disabled
Client Task Status
• n/a: NTP is disabled
• present: NTP is enabled and the client task is active
• missing: NTP is enabled but the client task is in an interim state
NTP Server Address
NTP server IP address, if set
Last Server Contact
Date and time, in UT, of the last message received from the NTP server, if any
Example Show NTP status for the system:
# show ntp-status
NTP Status
----------
Status: activated
Client Task Status: present
NTP Server Address: 69.10.36.3
Last Server Contact: 2008-12-04 16:24:42
See also • set controller-date