HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

130
show disks
Description Shows information about all disks in the storage system. If no parameter is specified, the command
shows information for all disks.
Syntax
show disks [disks|free|all|encl] [vdisk vdisk]
Parameters disks|free|all|encl
Optional. Specifies the disks to report information about:
• disks: IDs of the disks to show information about. For syntax, see Command syntax.
• free: Shows information about all disks that are available.
• all: Shows information about all installed disks.
• encl: Shows information about all disks by enclosure. This option shows different fields than the
other options and shows each disk slot, whether it contains a disk or not.
vdisk vdisk
Shows information for disks in the specified vdisk. For syntax, see Command syntax.
Output Without the encl option:
Location
Disk's enclosure and slot number
Serial Number
Disk serial number
Vendor
Disk vendor
Rev
Firmware revision number
How Used
• AVAIL: Available
• GLOBAL SP: Global spare
• LEFTOVR: Leftover
• VDISK: Used in a vdisk
• VDISK SP: Spare assigned to a vdisk
Any jobs running on the disk or its vdisk follow the state value:
• EXPD: The vdisk is being expanded
• INIT: The vdisk is being initialized
• RCON: The vdisk is being reconstructed
• VRFY: The vdisk is being verified
• VRSC: The vdisk is being scrubbed
Type
• SAS: Dual-port SAS
• SAS-S: Single-port SAS
• SATA: Dual-port SATA
• SATA-S: Single-port SATA
Size
Disk capacity
Rate(Gb/s)
Data transfer speed in Gbit/second