HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 115
set volume
Description Changes a volume's name and OpenVMS UID.
Syntax
set volume name new-name [ovms-uid ID] volume
Parameters name new-name
A new name for the volume. For syntax, see Command syntax.
ovms-uid ID
For a volume to be accessed by an OpenVMS host, assign a volume ID in the range 1–32767 to
identify the volume to the host.
volume
Name or serial number of the volume to change. For syntax, see Command syntax.
Example Rename volume V1 to V2:
# set volume name V2 V1
Success: Command completed successfully. - The volume was set.
See also • show host-maps
• show volumes
• show volume-maps