HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

114
set vdisk
Description Changes parameters for a specified vdisk.
Syntax
set vdisk [name new-name] [owner a|b] vdisk
Parameters name new-name
Optional. A new name for the vdisk. For syntax, see Command syntax.
owner a|b
Optional. The new owner: controller A or B.
CAUTION: Before changing the owning controller for a vdisk, you must stop host I/O to the vdisk’s
volumes. Volume mappings are not affected.
vdisk
Name or serial number of the vdisk to change. For syntax, see Command syntax.
Example Rename vdisk VD1 and change its owner to controller A:
# set vdisk name VD2 owner a VD1
Success: Command completed successfully
See also • show vdisks