Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

58 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
create snap-pool
Description
Creates a snap pool volume to use for snapshot data. A snap pool is an internal
volume only and cannot be assigned a LUN.
Input
Example
Create the 10-Gbyte snap pool SP1 on virtual disk VD1.
Related Commands
■ “delete snap-pool” on page 78
■ “show snap-pools” on page 216
■ “show vdisks” on page 230
create snap-pool vdisk vdisk size sizeMB|GB|TB name
Parameter Description
vdisk vdisk Specifies the virtual disk by name or serial number. For the
syntax to use, see “Virtual Disk Syntax” on page 26.
size sizeMB|GB|TB Specifies the volume size in MB (Mbyte), GB (Gbyte), or
TB (Tbyte). The size uses base 10 (multiples of 1000) or
base 2 (multiples of 1024); to see the current base setting,
type show cli-parameters. For information about
estimating snap-pool size, see help for the WBI’s Create
Snap-Pool page.
name Specifies a name for the new snap pool volume. For the
syntax to use, see “Volume Syntax” on page 26.
# create snap-pool vdisk VD1 size 10GB SP1
Success: Snap-pool Created.