Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

236 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Example
On a SAS system, show the mappings for volume V1.
On an FC system, show the mappings for volume V1.
On an iSCSI system, show the mappings for volume V1.
Related Commands
■ “show host-maps” on page 188
■ “show host-wwn-names” on page 194
■ “show iscsi-hosts” on page 195
■ “show volumes” on page 237
# show volume-maps V1
Volume [SN 00c0ff0a43180048517e054501000000, Name (V1)] mapping view:
CH LUN Access Host-Port-Identifier Nickname
------------------------------------------------------------------------
A1,B1 5 rw 0123456789AAABBB Host1
A0,B0 6 ro 0123456789AAACCC Host2
Success: Command completed successfully
# show volume-maps V1
Volume [SN 00c0ff0a43180048517e054501000000, Name (V1)] mapping view:
CH ID LUN Access Host-Port-Identifier Nickname
------------------------------------------------------------------------
0,1 0 5 rw 0123456789FFFFFF Host1
0,1 0 6 ro 0123456789AAAAAA Host2
Success: Command completed successfully
# show volume-maps
Volume [SN 00c0ff0a427d00484f28f54501000000, Name (V1)] mapping view:
CH ID LUN Access Host-Port-Identifier Nickname
------------------------------------------------------------------------
0,1 0 25 rw iqn.1991-05.com.microsoft:host1.domain Host1
0,1 0 26 rw iqn.1991-05.com.microsoft:host2.domain Host2
Success: Command completed successfully