Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 209
Example
Show the redundancy status of an operational dual-controller SAS system.
Show the redundancy status of an operational dual-controller FC system with one
controller offline.
Show the redundancy status of an operational single-controller system.
Controller ID
Serial Number
• Controller module serial number
• Not Available: The controller is down or not
installed.
# show redundancy-mode
System Redundancy
-----------------
Redundancy Mode : Active-Active ULP
Redundancy Status : Redundant
Controller A Status : Operational
Controller A Serial Number: 00C0FF0A4318
Controller B Status : Operational
Controller B Serial Number: 00C0FF0A4326
# show redundancy-mode
System Redundancy
-----------------
Redundancy Mode : Active-Active
Redundancy Status : Operational but not redundant
Controller A Status : Down
Controller A Serial Number: Not Available
Controller B Status : Operational
Controller B Serial Number: 00C0FF0A4326
# show redundancy-mode
System Redundancy
-----------------
Redundancy Mode : Single Controller
Redundancy Status : Operational but not redundant
Controller A Status : Operational
Controller A Serial Number: 00C0FF0A4318
Controller B Status : Not Installed
Controller B Serial Number: Not Available
Field Description