Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

204 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
show ntp-status
Description
Shows the status of the use of Network Time Protocol (NTP) in the system.
Input
Output
The output first indicates whether use of NTP is enabled (
activated). If activated,
the client task becomes present. Before activation and after successful deactivation
the status of the client task is not applicable (
n/a). The configured IP address of an
NTP server, if any, is displayed. If the system has received a time message from an
NTP server, the time of that contact is displayed.
show ntp-status
Field Description
Status • activated: NTP is enabled
• deactivated: NTP is disabled
Client Task Status • n/a: NTP is disabled
• present: NTP is enabled and the client task is
active
• missing: NTP is enabled but the client task is in an
interim state
NTP Server Address NTP server IP address, if set
Last Server Contact Date and time, in UT, of the last message received
from the NTP server, if any