Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 203
Show network parameters for a storage system using manual addressing.
Related Commands
■ “set network-parameters” on page 139
# show network-parameters
Network Parameters Controller A
-------------------------------
IP Address : 172.22.1.200
Gateway : 172.22.1.1
Subnet Mask : 255.255.255.0
MAC Address : 00:C0:FF:0A:43:18
Addressing Mode: Manual
Network Parameters Controller B
-------------------------------
IP Address : 172.22.1.201
Gateway : 172.22.1.1
Subnet Mask : 255.255.255.0
MAC Address : 00:C0:FF:0A:43:26
Addressing Mode: Manual