Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

174 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
show disks
Description
Shows information about disk drives in the controller enclosure and any attached
drive enclosures. The
encl option shows different fields than the other options and
shows each slot, whether or not a disk is present. If no parameter is specified, the
command shows information for all disk drives.
Input
Output (Standard)
show disks [disks|free|all|encl|vdisk vdisk]
Parameter Description
disks|free|all|encl
|vdisk vdisk
Optional. Specifies the disk drives to report information
about:
• disks: Specifies the disk drives. For the syntax to
use, see “Disk Drive Syntax” on page 25.
• free: Shows information for all disk drives that are
not assigned (status AVAIL).
• all: Shows information for all disk drives.
• encl: Show information for all disk drives by
enclosure.
• vdisk vdisk: Shows information for disk drives in
a specified virtual disk. For the syntax to use, see
“Virtual Disk Syntax” on page 26.
Field Description
ID SCSI ID
Serial# Disk drive serial number
Vendor Disk drive vendor
Rev. Firmware revision number