Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 129
set global-spare
Description
Designates spare disk drives that can be used by any virtual disk. Sets the disk drive
status to
global-spare. For the command to succeed, you must specify disk
drives that are large enough to protect existing virtual disks. You can designate a
maximum of eight global spares for the system.
Input
Example
Designate the disk drive having ID 5 in the controller enclosure as a global spare.
Related Commands
■ “delete global-spare” on page 73
■ “show disks” on page 174
set global-spare disks disks
Parameter Description
disks disks Specifies the disk drives. For the syntax to use, see “Disk Drive
Syntax” on page 25.
# set global-spare disks 0.5
Info: Disk 0.5 configured as a Global Spare.
Success: Command completed successfully