Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

126 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Example
Disable PHY fault isolation for Expander Controller A in an enclosure.
Re-enable PHY fault isolation for Expander Controller A in the same enclosure.
Related Commands
■ “set expander-phy” on page 127
■ “show enclosure-status” on page 178
■ “show expander-status” on page 184
# set expander-fault-isolation wwn 500C0FF00A408A3C controller a
disable
Success: Disabled expander fault isolation.
# set expander-fault-isolation wwn 500C0FF00A408A3C controller a
enable
Success: Enabled expander fault isolation.