Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 99
reset host-channel-link
Description
FC only. For a system using loop (FC-AL) topology, this command issues a loop
initialization primitive (LIP) for specified controller ports.
Input
Example
Reset the link on controller A port 0.
Related Commands
■ “show channels” on page 159
reset host-channel-link channel channels [controller a|b|both]
Parameter Description
channel channels Specifies a host port number or a comma-separated list
of host port numbers such as 0,1.
controller a|b|both Optional. Specifies whether to issue the LIP from
controller A, controller B, or both. If this parameter is
omitted, the default is the current controller.
# reset host-channel-link channel 0 controller a
Success: Reset Host Channel Link(s) on channel(s) 0 from
controller(s) a.