Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 233
show volumecopy-status
Description
Shows information about in-progress volume copy operations. While a volume copy
is in progress, the destination volume cannot be accessed.
Input
Output
show volumecopy-status [controller a|b]
Parameter Description
controller a|b Optional. Shows volume copy operations for volumes owned
by controller A or controller B only. If this parameter is
omitted, all volume copy operations are shown.
Field Description
VC Volume Name Destination volume name
Serial# Destination volume serial number
Vdisk Destination virtual disk name
Source Volume Source volume name
Progress Percent complete of the volume copy
Status Indicates whether the destination volume is Unavailable or
Suspended
Status-Reason The status is Unavailable while the volume-copy is in
progress. The status is Suspended if the source volume goes
offline while the copy is in progress. When the source volume
comes back online, the copy process resumes from the point
where it stopped.