Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

124 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
set drive-parameters
Description
Selects a global disk Self-Monitoring Analysis and Reporting Technology (SMART)
setting. Disk drives equipped with this technology can alert the controller of
impending drive failures. Changes to the SMART setting take effect after a rescan
or a controller reboot.
Input
Example
Enable SMART.
Related Commands
■ “show drive-parameters” on page 177
set drive-parameters smart enabled|disabled|detect-only
Parameter Description
smart enabled|
disabled|detect-only
Enables or disables SMART monitoring for all disk
drives in the storage system. Each drive added after
detect-only is set retains its SMART setting.
SMART is enabled by default.
# set drive-parameters smart enabled
Success: Command completed successfully