Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

108 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Example
Enable the
controller-failure trigger and disable the partner-notify
trigger.
Related Commands
■ “show auto-write-through-trigger” on page 156
■ “show events” on page 181
partner-notify
enable|disable
Specify whether to notify the partner controller that
a trigger condition occurred. Enable this option to
have the partner also change to write-through mode
for better data protection. Disable this option to
allow the partner continue using its current caching
mode for better performance. The default is
Disabled.
auto-write-back
enable|disable
Specify whether the cache mode automatically
changes to write-back after the trigger condition is
cleared.
# set auto-write-through-trigger controller-failure enable
partner-notify disable
Success: Auto-Write-Through-Trigger parameters have been changed
Parameter Description