HP 2000 Modular Smart Array Controller Firmware J202P01, J212P01, and J302P01 Release Notes (537811-008, December 2012)

◦ Updating array controller firmware may result in new event messages that are not described
in earlier versions of documentation. For comprehensive event message documentation, see
the most current version of the HP 2000 Modular Smart Array Reference Guide.
◦ The Smart Component update process logs messages to \CPQSYSTEM\Log\cpqsetup.log
on the system drive in Windows and /var/cpq/Component.log in Linux.
• When reverting to a previous version of firmware, note the following:
Ensure that both Ethernet connections are accessible before downgrading the firmware.◦
◦ When using a Smart Component firmware package, the process automatically disables
Partner Firmware Update (PFU) and then downgrade the firmware on each controller
separately (one after the other) through the Ethernet ports.
◦ When using a Binary firmware package, you must manually disable the Partner Firmware
Update (PFU) and then downgrade the firmware on each controller separately (one after the
other).
10 Installation instructions