HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

MSA1510i component LED
Condition
Power supply module status LED
Solid green = power is on.
Fan control module status LED
Solid green = power is on.
2-Port Ethernet iSCSI module status LED
Solid green = power is on,
themoduleisoperational,and
communication between the
module and the controller is
established.
SCSI I/O module status LED
Solid green = power is on.
Reading startup messages on the controller display panel
Each controller contains an integrated LCD panel. This panel displays informational and error messages,
shows the current status of the MSA1510i, and provides an interface for user input. To verify that your
MSA15
10i is operating properly, press the arrow buttons on the controller LCD panel and look for
the fo
llowing messages:
Table 5 MSA1510i controller LCD startup messages
Message
Meani
ng
01 MSA Startup Complete
Controller has completed its power-on
sequence and is operational.
00 Array Controller Firmware
ver <version>
Firmware version installed on the controller.
603 P
ort #MA0 IP <address>
IP address assigned to the Ethernet iSCSI
module management port (Port 0).
56
Installation