HP StorageWorks MSA SAN Switch 2/8 Installation Guide (December 2002)

Regulatory Compliance Notices
64 MSA SAN Switch 2/8 Installation Guide
Laser Product Label
The following label or equivalent is located on the surface of the HP supplied laser
device.
This label indicates that the product is classified as a CLASS 1 LASER
PRODUCT. This label appears on a laser device installed in your product.
Laser Information
The following table lists laser specifications.
Table 7: Laser Specifications
Item Specification
Wave length 850 nm ± 35 nm
Divergence angle 53.5 degrees ± 4.5 degrees
Output power Less than 2.0 mW or 10,869 Wm-2
sr-1
Polarization Circular 0.25
Numeric aperture 0.45 inches ± 0.04 inches