HP StorageWorks MSA SAN Switch 2/8 Installation Guide (December 2002)

Backing Up Configuration Data and Upgrading Firmware
57MSA SAN Switch 2/8 Installation Guide
2. Locate the panel for this switch and view the display.
If necessary, click the Detail View button to display more information.
The following information is displayed for the switch:
■ Name
■ Fabric OS version
■ Domain ID
■ Ethernet IP
■ Ethernet Mask
■ FCnet IP
■ FCnet Mask
■ Gateway IP
■ WWN
Performing a Firmware Upgrade through Web Tools
To download the latest version of the firmware on the switch:
1. Download the firmware from the HP website at
http://www.hp.com .
Go to the Support page for the required loaders and instructions.
2. Access Web Tools.
3. Click the Admin icon button (next to the switch panel display) to go to the
Administrative Interface.
At the prompt, enter a user name and password with administrative privileges
and click OK.
The Administrative Interface is displayed, with the Switch Settings tab
selected by default.
4. Select the Firmware Upgrade (Firm Upgrd) tab.
The Firmware Upgrade page is displayed.
Figure 12 is an illustration of this Firmware Upgrade page.