HP StorageWorks Modular Smart Array 1000 (MSA1000) Command Line Interface Reference Guide (September 2003)

Command Line Interface (CLI)
61MSA1000 Command Line Interface Reference Guide
Disabling the ACL
If the ACL has been set up, but the decision has been to not use it and not limit
access to the storage, the entries in the ACL need to be deleted. Use the following
command to delete all entries in the ACL.
Basic Command
SET ACL DISABLE
Example CLI Response
Disabling acl
Note: When this command is used, all existing ACL entries are automatically deleted.
All storage is immediately available to all connected servers.