HP StorageWorks Modular Smart Array 1000 (MSA1000) Command Line Interface Reference Guide (September 2003)

Command Line Interface (CLI)
50 MSA1000 Command Line Interface Reference Guide
Changing Attributes of a LUN
To enable or disable the array accelerator cache for a specific LUN:
Basic Command
SET UNIT
Example Command
CLI> SET UNIT 0 CACHE=DISABLE
Command Options
UNIT 0—the number of the LUN to modify. In this example, LUN 0 will be
modified.
CACHE=ENABLE or DISABLE—either enables or disables the use of the array
accelerator cache for the specified LUN.
Example CLI Response
CLI> SET UNIT 0 CACHE=ENABLE
Cache for unit 0 has been enabled.
CLI> SET UNIT 1 CACHE=DISABLE
Cache for unit 1 has been disabled.