HP StorageWorks 1000 Modular Smart Array application note: Migrating to active/active controllers in Tru64 UNIX environments (434886-001, October 2006)

Migrating to active/active controllers in Tru64 UNIX environments 9

Install the additional MSA array controller using instructions shipped with the

controller.

NOTE: Before installing the additional array controller, be sure that both controllers

have the same cache size installed.

After installing the additional array controller, allow the auto-cloning process to

compare the firmware on the two controllers and clone the firmware from the previously

updated controller to the additional controller.

The message, MSA STARTUP COMPLETE displays on the controller LCD panel when

the additional controller reboots.

Step Description (continued) Check