HSG80 ACS Solution Software V8.6 for IBM AIM Installation and Configuration Guide

4–8 HSG80 ACS Solution Software Version 8.6 for IBM AIX Installation and Configuration Guide
■ Adds a line to the /etc/inittab file so that the agent respawns after it has been stopped.
■ Enters a line into the /etc/syslog.conf file so that error messages from the agent are
redirected to /var/adm/ras/steamd.log
Updating inittab file...done
Updating syslog.conf file...done
The script asks where the devices on your system are kept. On all AIX systems, this is the
/dev directory, therefore, accept the defaults
Enter the directory which contains the device special files
(default for AIX is /dev) : <press ENTER>
The chosen directory is: /dev
Is this OK? [Y,n]
y
Here, you are entering the password that the client asks for when you configure a RAID
array. The password must be entered twice. The password is not echoed when you type it.
Enter a password for use with the STEAM Agent (4->16 characters) : <password>
Verify the password : <password again>
Enter "compaq computer corporation" as the agent manufacturer.
The STEAM Agent can operate with other SNMP applications. For this
reason, its needs information about the Agent manufacturer and the
the Enterprise object identifier for use with its MIB.
Enter the name of the Agent manufacturer (no default) : compaq computer corporation
The Agent manufacturer is: compaq computer corporation
Is this OK? [Y,n]
y
The OID number is used by SNMP trap applications to identify what MIB to use when it
receives a trap. Accept the default value.