Compaq StorageWorks HSG60 ACS Solution V8.6 for SGI IRIX Installation and Configuration Guide

4–6 HSG80 ACS Solution Software Version 8.6 for SGI Irix Installation and Configuration Guide
*Port number that the Command Console Agent
uses to send notifications to the Command
Console Client.
*Default is 4999.
If the default port is already used, press N and
specify a new port.
The directory which contains the device special
files.
Irix device special files are located in the /dev/scsi
directory.
A password to gain access to the agent to
configure the RAID subsystem with the Client.
Enter a 4–16 character password. The install
program does not echo what you enter.
*The name of CC Agent manufacturer and the
Enterprise object identifier for use with its MIB, so
that it can operate with other SNMP applications.
*Enter Compaq Computer Corporation as the CC
Agent manufacturer.
*The Enterprise Object Identifier (OID) is a vendor
specific value used to identify SNMP messages.
*Enter: 36.2.15.21
*Names of the Host Systems on which you will run
the Client.
*Enter the network names for the hosts from
which you will run the Client.
Level of access a client has for communicating
with the storage systems.
The possible options are:
0 = Navigation Tree monitoring only
1 = Navigation Tree and Storage Window
monitoring only
2 = Navigation Tree monitoring, Storage Window
monitoring and configuration
You can give a client configuration level access
only if you specified an access password.
Table 4–3 Information Required for Install Program Prompts (Continued)
Information Required to Complete Installation How to Respond