Compaq StorageWorks HSG60 ACS Solution V8.6 for SGI IRIX Installation and Configuration Guide

Index–2 HSG60 ACS Solution Software Version 8.6 for SGI Irix Installation and Configuration Guide
choosing for RAIDsets and stripesets 2-23
controlling stripesize 2-23
using to increase data transfer rate 2-25
using to increase request rate 2-24
using to increase write performance 2-26
CHUNKSIZE 2-23
CLI commands
installation verification 5-8
CLI prompt
changing
fabric topology 5-20
Client
removing B-6
uninstalling B-6
CLONE utility
backup 7-2
cloning
backup 7-2
command console LUN 1-9
SCSI-2 mode 1-16
Compaq Insight Manager B-7
comparison of container types 2-7
Configuration
fabric topology
procedure flowchart
illustrated 0-xviii
configuration
backup 7-1
fabric topology
devices 5-14
multiple-bus failover
cabling 5-9
multiple-bus failover using CLI 6-5
single controller cabling 5-3
fibre channel fabric topology
using CLI 5-1
using SWCC 5-1
restoring 2-26
rules 2-3
configuration options
fabric topology
adding a disk drive to the spareset 5-21
adding disk drives 5-20
changing switches
device 5-23
displaying the current switches 5-23
initialize 5-23
RAIDset and mirrorset 5-23
unit 5-23
changing switches for a storageset or
device 5-23
changing the CLI prompt 5-20
deleting a storageset 5-22
enabling autospare 5-22
removing a disk drive from the spareset
5-21
configuring
pager notification B-7
configuring devices
fabric topology 5-14
connections 1-11
naming 1-11
containers
attributes 2-6
comparison 2-7
illustrated 2-7
mirrorsets 2-13
planning storage 2-6
stripesets 2-12
controller verification
installation 5-8
controllers
cabling 5-4
, 5-9
location 1-2
node IDs 1-17
verification of installation 5-8
worldwide names 1-17
creating
storageset and device profiles 2-8
creating disk label 3-6
creating filesystems 3-10
D
data transfer rate 2-25
DESTROY 2-26