Compaq StorageWorks HSG60 ACS Solution V8.6 for SGI IRIX Installation and Configuration Guide

Configuration Example Using CLI 6–7
NOTE: The offset for !NEWCONO1 is automatically set to 100 because it is plugged into host
port 2.
RENAME !NEWCON01 WHITE1B2
SET WHITE1B2 OPERATING_SYSTEM=SGI
SHOW CONNECTIONS
Mark or tag both end of Fibre Channel cables.
Plug in the Fibre Channel cable from the adapter in host “TAN.”
SHOW CONNECTIONS
RENAME !NEWCON02 TAN1B2
SET TAN1B2 OPERATING_SYSTEM=SGI
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
!NEWCON01 WNNT THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
PURPLE1A1 SGI OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
PURPLE1A1 SGI OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
WHITE1B2 SGI THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
!NEWCON02 SGI THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
PURPLE1A1 SGI OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
WHITE1B2 SGI THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX