Compaq StorageWorks HSG60 ACS Solution V8.6 for SGI IRIX Installation and Configuration Guide

Configuration Example Using CLI 6–5

CLI Configuration Example

The series of commands and information presented in this section provides a CLI

configuration example. Text conventions used in this section are listed below:

■ Text in italics indicates an action you take.

■ Text in THIS FORMAT, indicates a command you type. Be certain to press Enter after each

command.

■ Text enclosed within a box, indicates information that is displayed by the CLI

interpreter.

■ NOTE text provides additional helpful information.

NOTE: “This” controller is top controller (A).

Plug serial cable from maintenance terminal into top controller.

CLEAR CLI

SET FAILOVER COPY=THIS

CLEAR CLI

SET THIS SCSI_VERSION=SCSI-2

SET THIS PORT_1_TOPOLOGY=FABRIC

SET THIS PORT_2_TOPOLOGY=FABRIC

SET OTHER PORT_1_TOPOLOGY=FABRIC

SET OTHER PORT_2_TOPOLOGY=FABRIC

RESTART OTHER

RESTART THIS

SET THIS TIME=10-Mar-2001:12:30:34

RUN FRUTIL

NOTE: If “N” is selected, there is no warning when the battery is low.

Do you intend to replace this controller's cache battery? Y/N [N]