Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

4–6 HSG80 ACS Solution Software Version 8.6 for Sun Solaris Installation and Configuration Guide
2. Enter the following command:
#./config.sh
The Configuration Menu shown in Figure 4–2 displays.
Figure 4–2. RAID Array V8.6 Configuration Menu
IMPORTANT: When you change the Agent configuration, you must restart the Agent for your
changes to take effect.
---- RAID Array V8.6 Configuration Menu ----
Agent Admin Options
---------------------
1) Change Agent Password
2) Change SNMP Enterprise OID
3) Start/Stop the Agent
4) Toggle Agent Startup on System Boot
5) Uninstall Agent
Agent Notification Options
---------------------------
6) Toggle Error Log Notification
7) Toggle Mail Notification
8) View Mail Notification List
9) Add User to Mail Notification List
10) Remove User from Mail Notification List
11) Modify Mail Notification List
Exit:
-----
q) Quit
Enter Selection:
Storage Subsystem Options
-----------------------------
12) View Subsystems
13) Add a Subsystem
14) Remove a Subsystem
15) Modify a Subsystem
Client Options
---------------
16) View Clients
17) Add a Client
18) Remove a Client
19) Modify a Client
Other Options
-------------
20) Add/Change Adapters
21) High Avail. Options