Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

Installing and Configuring the HS-Series Agent 4–5

■ Install.sh–This utility is usually used for first-time configuration or upgrades. It

guides you through the configuration of your Agent. It also identifies and upgrades any

old Agent configuration files from previous RAID Manager packages. See

"Configuring the Agent with Install.sh (for First-time Configurations)" for details.

■ Config.sh–A menu-based administration tool that is usually used to modify your

Agent configuration after installation. It provides more options than install.sh, so

it is recommended for advanced users or users with unique configuration needs. It can

also be used for first-time configuration. See "Configuring the Agent with RAID Array

V8.6 Configuration Menu"for instructions on running Config.sh

Configuring the Agent with Install.sh

(for First-time Configurations)

For first-time configurations, run the install.sh script from the $basedir/steam/bin

directory (usually /opt/steam/bin). This script will guide you through the following

actions:

■ Adding a subsystem entry

■ Adding a Client entry

■ Creating a password

■ Setting up email notification

■ Starting the Agent

1. To change directories, enter the following command:

# cd /opt/steam/bin

2. To run the installation, enter the following command:

# ./install.sh

Follow the on-screen prompts to set up your Agent files. If install.sh finds

backed up Agent configuration files, you will be asked if you want to upgrade them.

Configuring the Agent with RAID Array V8.6 Configuration

To view the RAID Array V8.6 Configuration Menu, run the Config.sh script from the

$basedir/steam/bin directory (usually /opt/steam/bin).

1. Enter the following command:

# cd /opt/steam/bin