Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

Index–2 HSG60 ACS Solution Software Version 8.6 for Sun Solaris Installation and Configuration Guide
read-ahead caching 1-9
write-back caching 1-9
write-through caching 1-9
changing switches
configuration options 5-23
choosing passwords
Agent 4-7
chunk size
choosing for RAIDsets and stripesets 2-23
controlling stripesize 2-23
using to increase data transfer rate 2-25
using to increase request rate 2-24
using to increase write performance 2-26
CHUNKSIZE 2-23
CLI commands
installation verification 5-9
CLI prompt
changing
fabric topology 5-20
Client
adding 4-7
removing B-6
uninstalling B-6
CLONE utility
backup 8-2
cloning
backup 8-2
command console LUN 1-10
SCSI-2 mode 1-19
SCSI-3 mode 1-19
Compaq Insight Manager B-7
comparison of container types 2-7
Configuration
fabric topology
procedure flowchart
illustrated 0-xx
configuration
backup 8-1
fabric topology
devices 5-14
multiple-bus failover
cabling 5-9
multiple-bus failover using CLI 7-5
single controller cabling 5-4
fibre channel fabric topology
using CLI 5-1
using SWCC 5-1
restoring 2-26
rules 2-3
configuration options
fabric topology
adding a disk drive to the spareset 5-21
adding disk drives 5-20
changing switches
device 5-23
displaying the current switches 5-23
initialize 5-23
RAIDset and mirrorset 5-23
unit 5-23
changing switches for a storageset or
device 5-23
changing the CLI prompt 5-20
deleting a storageset 5-22
enabling autospare 5-22
removing a disk drive from the spareset
5-21
configuring
Agent
using config.sh 4-5
pager notification B-7
configuring devices
fabric topology 5-14
connections 1-12
naming 1-12
containers
attributes 2-6
comparison 2-7
illustrated 2-7
mirrorsets 2-13
planning storage 2-6
stripesets 2-12
controller verification
installation 5-9
controllers