Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

6–12 HSG60 ACS Solution Software Version 8.6 for Sun Solaris Installation and Configuration Guide
Option 2 - Add an Adapter
Select Option 2 to be informed of and prompted for permission to scan the bus(es) on the
system and report any adapters not already listed. The steps that follow when adding an
adapter are self-explanatory.
Option 3 - Remove an Adapter
Select Option 3 to view a list of the adapters. You can then either choose to quit the
’remove’ operation by pressing Enter or select an adapter by inputting the adapter NN
(numeric identification at the left in the list). The user must then confirm that this adapter
is to be removed from the list.
Option 4 - Modify an Adapter
Select Option 5, Modify an Adapter, to see a list of the adapters. To quit the ’modify’
action by pressing Enter or select an adapter to modify by entering the NN (numeric
identification at the left in the list).
Option 5 - View Available WWPNs
Select this option to run the Scan Adapters Utility. This utility detects available adapters
and WWPNs for this host.
1. cd opt/steam/bin
2. .config.sh
In the following example you will:
■ Change the mode from fabric to loop.
■ Change the number of LUNs per Target.