Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

Fibre Channel: Considerations for Both Loop and Fabric Environments 6–11
To make a change to the adapters select Option 20, Add/Change Adapters. When selected,
you access the following sub-menu:
--- Adapter Configuration Menu ---
(sd.conf & fc*.conf)
1) View Adapters
2) Add an Adapter
3) Remove an Adapter
4) Modify an Adapter
5) View available WWPNs
q) Exit
Enter choice:
NOTE: In the header of this sub-menu we are reminded that actions that are performed here
will affect the specific instance mappings in the /kernel/drv/sd.conf file as well as the specific
driver file, fca.conf or fcaw.conf or fca-pci.conf.
Option 1 - View Adapters
The sample display below shows one SBUS 64-bit Adapter and two PCI Adapters. The
SBUS adapter is configured for Arbitrated Loop and the PCI adapters are configured for
Fabric mode. Note also that both PCI adapters are communicating with the same
Worldwide Port Name entities on the Fabric. We do not know anything about the RAID
configuration that is employed.
NN Adapter # Control. M LN Targets Port IDs ( WWPN ) Driver Path
-- --------- -- ------- -- --- ------- ------------------------------
1 fcaw0 fcaw L 16 64,65 /sbus@2,0/fcaw@2,0
2 fibre-channel 0 fca-pci F 16 64 5000-1fe1-0000-0d41 /pci@a,2000/fibre-channel@2
65 5000-1fe1-0000-0d42
3 fibre-channel 1 fca-pciF 16 64 5000-1fe1-0000-0d41 /pci@b,2000/fibre-channel@2
65 5000-1fe1-0000-0d42
-- Hit RETURN to continue --