Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

4–8 HSG80 ACS Solution Software Version 8.6 for Linux X86 and Alpha Installation and Configuration Guide
Figure 4–2. RAID Array V8.6 Configuration Menu
IMPORTANT: When you change the Agent configuration, you must restart the Agent for your
changes to take effect.
Choosing a Password
Select option 1 from the Agent Admin Options group to set a password to protect your
subsystems from unauthorized access. Any Client with configuration privileges will be
asked for this password when attempting to configure the subsystem.
---- RAID Array V8.6 Configuration Menu ----
Agent Admin Options
---------------------
1) Change Agent Password
2) Change SNMP Enterprise OID
3) Start/Stop the Agent
4) Toggle Agent Startup on System Boot
5) Uninstall Agent
Agent Notification Options
---------------------------
6) Toggle Error Log Notification
7) Toggle Mail Notification
8) View Mail Notification List
9) Add User to Mail Notification List
10) Remove User from Mail Notification List
11) Modify Mail Notification List
Exit:
-----
q) Quit
Enter Selection:
Storage Subsystem Options
-----------------------------
12) View Subsystems
13) Add a Subsystem
14) Remove a Subsystem
15) Modify a Subsystem
Client Options
---------------
16) View Clients
17) Add a Client
18) Remove a Client
19) Modify a Client
Other Options
-------------
20) Add/Change Adapters
21) High Avail. Options