Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

Installing and Configuring the HS-Series Agent 4–7

2. To run the installation, enter the following command:

# ./install.sh

Follow the on-screen prompts to set up your Agent files. If install.sh finds

backed up Agent configuration files, you will be asked if you want to upgrade them.

After you configure your Agent, you can use the SWCC Client software to create

storagesets. See Appendix B for instructions on installing and using the SWCC Client.

Configuring the Agent with RAID Array V8.6 Configuration

To view the RAID Array V8.6 Configuration Menu, run the Config.sh script from the

$basedir/steam/bin directory (usually /usr/local/steam/bin).

1. Enter the following command:

# cd /usr/local/steam/bin

2. Enter the following command:

#./config.sh

The Configuration Menu shown in Figure 4–2 displays.