Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

3–6 HSG60 ACS Solution Software Version 8.6 for Linux X86 and Alpha Installation and Configuration Guide
-- Press Return to Continue --
W e l c o m e t o L i n u x P l a t f o r m K i t
I N S T A L L A T I O N
This Installation Manager guides you through the installation of the different software
packages that may be required for your system. Follow the on-screen instructions carefully,
some of the packages may not apply to your system.
Most of the prompts have an appropriate default, so if you aren't sure of a question, just hit
enter to accept the default.
The Installation Manager will examine your system configura- tion and automatically load
and / or update all supported HBA drivers and RAID Manager packages. This includes
removing old or unsupported packages.
You will be prompted before any changes are made to your system.
-- Press Return to Continue --
The following steps are needed to complete before the installation process:
1) Verify that the settings of your Enterprise Storage RAID Array meet the requirements listed
in section 1.2.4 of the Installation Reference Guide, and correct them, if necessary.
2) Verify that your Enterprise Storage RAID Array is configured to create a connectivity in
SCSI-3 mode.
3) Verify that your Enterprise Storage RAID Array already has at least one configured LUN.
4) Verify that your Enterprise Storage RAID Array settings include enabled CCL.
5) Verify that the COMPAQ/QLogic QLA2X00 HBA is present.
Are you ready to continue the installation? [Y,n]
Checking your hardware architecture ...
The current Linux PK supports the following architectures:
alpha i.86
The Hardware Architecture: i686.