Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

Preparing the Host System 3–5
To install the Linux Platform kit, run install_stgwks and follow the instructions on your
screen. The install_stgwks is a guide, which checks your Linux environment and helps to
configure Linux Platform Kit according to your environment. The install_stgwks directs
you through several screens to check and configure your system.
Notes for Advanced Users and System Administrators
■ If you install the packages manually, install CPQqla2x00 before QPQraidsw.
■ If you build the HBA driver into your kernel, enable: “Probe all LUNs on each SCSI deive”
and “SCSI generic support.”
■ Since some edits described in the README files are done automatically during the
installation process they do not need to be done manually.
Install_stgwks Example
An example run of install_stgwks is shown below.
*****************************************************************
Copyright (c) Compaq Computer Corporation, 1996 - 2001
All Rights Reserved. Unpublished rights reserved under
the copyright laws of the United States.
The software contained on this media is proprietary to
and embodies the confidential technology of Compaq
Computer Corporation. Possession, use, duplication or
dissemination of the software and media is authorized only
pursuant to a valid written license from Compaq Computer
Corporation.
RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure
by the U.S. Government is subject to restrictions as set
forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013,
or in FAR 52.227-19, as applicable.
*****************************************************************