Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

Index–5
partitions
assigning a unit number
fabric topology 5-21
defining 2-20
planning considerations 2-19
guidelines 2-20
passwords
choosing 4-8
performance 2-15
planning
overview 2-8
striped mirrorsets 2-18
stripesets 2-12
planning considerations 2-15
planning storage
containers 2-6
where to start 2-2
planning storagesets
characteristics
changing switches 2-21
enabling switches 2-21
initialization switch 2-21
storagest switch 2-21
unit switch 2-21
switches
initialization 2-23
storageset 2-22
unit 2-27
profiles
creating 2-8
description 2-8
storageset A-1
example A-2
R
RAIDManager
mail messages 4-10
RAIDset switches
changing
fabric topology 5-24
RAIDsets
choosing chunk size 2-23
maximum membership 2-17
planning considerations 2-15
important points 2-16
switches 2-22
read caching
enabled for all storage units 1-7
general description 1-7
read requests
decreasing the subsystem response time with
read caching 1-7
read-ahead caching 1-7
enabled for all disk units 1-7
removing
Client B-6
request rate 2-24
requirements
host adapter installation 3-2
restricting host access
disabling access paths
transparent failover 1-19
separate links
transparent failover 1-18
transparent failover 1-18
S
SAVE_CONFIGURATION 2-26
saving configuration 2-26
SCSI version
offset 1-16
SCSI-2
assigning unit numbers 1-16
command console lun 1-17
SCSI-3
assigning unit numbers 1-16
command console lun 1-16
selective storage presentation 1-17
SET CONNECTIONS
transparent failover 1-14
setting
controller configuration handling 2-26
single disk (JBOD)
assigning a unit number