Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Linux X86 and Alpha Installation and Configuration Guide

Index–2 HSG60 ACS Solution Software Version 8.6 for Linux X86 and Alpha Installation and Configuration Guide
configuration options 5-24
choosing passwords
Agent 4-8
chunk size
choosing for RAIDsets and stripesets 2-23
controlling stripesize 2-23
using to increase data transfer rate 2-25
using to increase request rate 2-24
using to increase write performance 2-26
CHUNKSIZE 2-23
CLI commands
installation verification 5-9
CLI prompt
changing
fabric topology 5-21
Client
adding 4-9
removing B-6
uninstalling B-6
CLONE utility
backup 7-2
cloning
backup 7-2
Command Console Agent_restarting 4-9
command console LUN 1-8
SCSI-2 mode 1-17
SCSI-3 mode 1-16
Compaq Insight Manager B-7
comparison of container types 2-7
Configuration
fabric topology
procedure flowchart
illustrated 0-xviii
configuration
backup 7-1
fabric topology
devices 5-15
multiple-bus failover
cabling 5-10
multiple-bus failover using CLI 6-5
single controller cabling 5-4
fibre channel fabric topology
using CLI 5-1
using SWCC 5-1
restoring 2-26
rules 2-3
configuration options
fabric topology
adding a disk drive to the spareset 5-22
adding disk drives 5-22
changing switches
device 5-24
displaying the current switches 5-24
initialize 5-24
RAIDset and mirrorset 5-24
unit 5-25
changing switches for a storageset or
device 5-24
changing the CLI prompt 5-21
deleting a storageset 5-23
enabling autospare 5-23
removing a disk drive from the spareset
5-22
configuring
Agent
using config.sh 4-7
pager notification B-7
configuring devices
fabric topology 5-15
connections 1-10
naming 1-10
containers
attributes 2-6
comparison 2-7
illustrated 2-7
mirrorsets 2-13
planning storage 2-6
stripesets 2-12
controller verification
installation 5-9
controllers
cabling 5-5
, 5-10, 5-11
location 1-2
node IDs 1-21