HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

178 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # service default-port 7800
minna (config) #
service enable
Description Starts the HP EFS WAN Accelerator service.
The no command option disables the HP EFS WAN Accelerator service (that is, it
disables all the configured in-path IP addresses and ports, and you lose your
connection to the HP EFS WAN Accelerator Manager).
Syntax [no] service enable
Parameters None
Example
minna (config) # service enable
minna (config) #
service error reset
Description Resets the HP EFS WAN Accelerator service after a service error.
Syntax service error reset
Parameters None
Example
minna (config) # service error reset
minna (config) #
service map-port
Description Sets a target port to service port mappings. Setting multiple service ports on inner
connections enables you to identify the type of traffic and apply QoS settings based
on a port.
The no command option disables the service map.
For example, in an in-path deployment, CIFS and MAPI could be mapped to port 9800
and HTTP to port 9802. The you can configure the WAN router to tag packets for port
9800 with the same priority as for CIFS and MAPI, and those for port 9802, with the
same priority as HTTP.
In the out-of-path deployment, you define which port to listen to on the server HP EFS
WAN Accelerator, and you define an in-path, fixed-target rule on the client HP EFS
WAN Accelerator to point to the service ports for the traffic you want to apply QoS to.