HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 117
4 - CONFIGURATION-MODE
C
OMMANDS
in-path rule move
Description Moves an in-path rule.
Syntax in-path rule move <rulenum> to <rulenum>
Parameters
Example
minna (config) # in-path rule move 25 to 10
minna (config) #
in-path rule pass-through
Description Adds an in-path, pass-through rule. Specify a subnet for which you do not want to
optimize traffic.
The no command option disables the in-path rule. The no command option has the
following syntax: no in-path rule <rulenum>.
Syntax [no] in-path rule pass-through
{srcaddr <network> dstaddr <network> dstport <port>} [rulenum <rulenum>]|
[vlan <vlan tag ID>]
Parameters
Example
minna (config) # in-path rule pass-through dstaddr 10.10.10.1 dstport
2121
minna (config) #
<rulenum> Specifies the rule number or start or end.
srcaddr <network> Specifies the source IP address for which this rule applies. Use the
following format: XXX.XXX.XXX.XXX/XX
dstaddr <network> Specifies the destination server address. Use the following format:
XXX.XXX.XXX.XXX/XX
dstport <port> Specifies the destination port for this rule. The destination port can
be a single port (number), a port label, or all specifies all ports.
rulenum <rulenum> Specifies the rule number: 1-N or start or end. The rule inserts
itself at the rule specified. For example, if rulenum is 3 then the
new rule will be #3, the old #3 rule will be #4 and so forth. Start
specifies the rule to be the first rule, and end specifies it to be the
last rule.
vlan <vlan tag ID> Specifies the VLAN tag ID for which the rule applies. The VLAN
identification number is a value with a range from 0-4094 (0
specifies no-tagging).