HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Installation and Configuration Guide (November 2005)

30 2 - INSTALLING AND CONFIGURING THE HP EFS WAN ACCELERATOR
WARNING: Ensure that the HP EFS WAN Accelerator is properly grounded. See the
HP ProLiant DL320 Generation 3 Server User Guide or the HP ProLiant DL380 Generation
4 Server Reference and Troubleshooting Guide for more information on grounding.
To power on the HP
ProLiant DL320-510,
DL320-1010, and
DL320-2010
1. Plug the AC power cord into the HP EFS WAN Accelerator (Figure 2-4 on
page 27, item 3).
2. Plug the AC power cord into an uninterrupted AC power source .
3. Press the Power On/Standby button on the front of the HP EFS WAN
Accelerator (Figure 4-1 on page 53, item 6).
4. Check the status lights on the front and rear of the HP EFS WAN
Accelerator (Figure 4-1 on page 53).
To power on the HP
ProLiant DL380-3010
and DL380-5010
1. Plug the AC power cords into the HP EFS WAN Accelerator (Figure 2-5 on
page 28, item 7).
2. Plug the AC power cords into an uninterrupted AC power source.
3. Press the Power On/Standby button on the front of the HP EFS WAN
Accelerator (Figure 4-2 on page 55, item 6).
4. Check the status lights on the front and rear of the HP EFS WAN
Accelerator (Figure 4-2 on page 55).
NOTE: The disk drives take about 2-5 minutes to boot.
HP System Management Homepage v2.0
The HP System Management Homepage v2.0 is a web-based interface that
consolidates and simplifies the management of HP ProLiant servers. It
provides a secure and intuitive interface to review in-depth hardware
configuration and status data, performance metrics, system thresholds and
software version control information. Go to the
HP System Management
Homepage v2.0 for more information.
Integrated Lights-Out
The Integrated Lights-Out (iLO) feature allows remote server management.
Refer to the Integrated Lights-Out User Guide that came with the
documentation set CD-ROM for your product.